Pleasanton
COMMUNITY BUSINESS GOVERNMENT SERVICES  
 

City of Pleasanton

IN THIS SECTION
Forms and Applications
Permit Process
Quick Reference
Required Documentation, Commercial
Required Documentation, Residential
California Energy Guidelines Forms
Building and Safety Fees
 

 

YOU MAY WANT ...
Engineering
Planning Services
 

 

WHAT'S NEW
Newsroom
 

 
Required Documentation for Commercial Buildings

General Requirements

Plans must be wet signed by the designer. If the designer is a licensed architect or civil engineer, then a professional stamp must be affixed to the plans as well. If the design professional does not wish to sign the plans on the first round of plan check they may annotate the plans "Not for Construction, Plan Check Only", and the plans can be accepted without a signature. An "Application for Building and Safety Division Permits" form must be filled out and accompany all plan submittals.

1. New commercial construction or additions

  • 4 complete sets of plans.

-Architectural (floor plans, elevations, etc.)

-Green Building Checklist
-Plumbing, Mechanical and Electrical
-Structural
-Site Plan

  • 2 sets of structural calculations.
  • 2 sets of Title 24 energy calculations.
  • 2 copies of the Soils Report or site-specific letter from a licensed Soils Engineer.
  • 2 copies of the Soils Report or site-specific letter from a licensed Soils Engineer.

-grading and drainage
-erosion control
-landscape and irrigation
-site utilities

  • Two sets of site hydrology map and calculations.

-NPDES Guidelines

  • A copy of the Building Permit Questionnaire provided by the Planning Department must be filled out, signed and submitted with the plan check documents. Contact the City Planning Department for a copy of this questionnaire at 925-931-5600.
  • Zone 7 Drainage form.
  • Payment of the plan check fee.

2. Tenant improvements, remodels or modifications

  • Three sets of plans.
  • Two sets of structural calculations (when applicable) and 2 sets of Title 24 energy calculations.

3. Resubmittals

  • Resubmittal requirements are noted on the correction list. Generally, the requirements are 4 sets of revised plans with all changes and modifications annotated in some way (clouded and accompanied by a delta number). Two sets of any supplemental or revised structural and energy calculations.


Note: if only revised plan sheets are proposed to be resubmitted, the applicant is responsible for collating these pages into the existing sets of plans.

 

 
 

 

Home Contact Us Newsroom FAQ